News:

SMF - Just Installed!

Main Menu

Recent posts

#1
Medeek Electrical Plugin / Re: Development and Updates fo...
Last post by Medeek - February 16, 2025, 12:57:54 AM
**Version 1.5.0** - 02.16.2025
- Added two generic side discharge hvac/heat pump condensor units into the built-in library: HP_XV19_42, HP_XV19_36.
- Added various "Wilkerson Art" framed art prints within the "art" category under misc. fixtures: Wasco, Frog, Hummingbird, Eagle under Sun, Killer Whale, Abstract and Medeek (Grizzly Bear).





http://www.wilkersonart.com

The funny thing is that I added the hummingbird framed art back in June (2024) as an Easter Egg but I guess no one noticed, or at least no one ever messaged me about it so I guess it went undetected.  I've also added in a decent wall clock as well for those needing a wall clock mounted in a room.

Decided to take a much needed break from the code today and did some other misc. tasks.  This one just kind of popped up on my radar so I figured I would add a few more framed prints.

As far as using the artwork in any of your projects, so long as you hold a licensed copy of the Medeek Electrical plugin you are authorized to use my artwork in any personal or professional projects you see fit.  My only request is that if you do decide to use the artwork, please give attribution where possible and applicable.

#2
Medeek Truss Plugin / Re: Development and Updates fo...
Last post by Medeek - February 15, 2025, 08:33:40 PM
I've started working on adding in a scissor truss option into the module. Here are some quick and dirty (sorry I must have set my lunch down on my engineering pad earlier today) calcs for the heel joint of such a truss:

#3
Medeek Wall Plugin / Re: Development and Updates fo...
Last post by Medeek - February 13, 2025, 11:26:56 PM
Version 3.9.0d - 02.14.2025
- Fixed a floating point rounding bug for metric templates.
- Fixed a bug for balusters when a run of stairs is a single step.

Still putting out a few little fires.  Whenever you make big changes it always seems like you miss something or you add a new feature that adds a whole new level of complexity, and then the plugin gets itself into states that you did not foresee.  That is what makes this job fun, you get surprised once in a while.

Please feel free to send me any additional bug reports or feature requests.  I think we've just about wrapped up the stair module for a while.
#4
Medeek Wall Plugin / Re: Development and Updates fo...
Last post by Medeek - February 12, 2025, 10:49:40 PM
Version 3.9.0c - 02.12.2025
- Fixed a bug when the top tread is flush.
#5
Medeek Electrical Plugin / Re: Development and Updates fo...
Last post by Medeek - February 11, 2025, 02:50:44 AM
Version 1.4.9 - 02.11.2025
- Added three generic hvac condensor units/sizes into the built-in library (with WeatherGuardTM tops): 30X28_WG, 30x32_WG, 30x40_WG.



These additional variants added per customer request.  They are the exact same as the similar sized units other than the addition of the weather guard top.  Hopefully this gives enough selection for typical residential AC units however if there is need for any other styles etc... please let me know.
#6
Medeek Wall Plugin / Re: Development and Updates fo...
Last post by Medeek - February 11, 2025, 12:54:50 AM
Version 3.9.0 - 02.11.2025
- Enabled zero size intermediate posts (balusters) for glass railing.
- Fixed a bug with floor level winders/landings for landing treads and covers.



#7
Medeek Wall Plugin / Re: Development and Updates fo...
Last post by Medeek - February 09, 2025, 11:34:32 AM
Version 3.8.9 - 02.09.2025
- Added preview thumbnails for handrail fittings to the draw and edit menus of the stair tool.
- Fixed a bug with adjacent winders/landings for landing treads and covers.
- Fixed a minor bug with materials for handrail fittings.

#8
Medeek Wall Plugin / Re: Development and Updates fo...
Last post by Medeek - February 08, 2025, 04:18:49 AM
mdkBIM Renewals - UPDATE (Feb. 8, 2025)

For those who can not be bothered to renew each license separately, I have come up with a solution finally. If you are mdkBIM license holder (ie. you have all five licenses - Wall, Truss, Floor, Foundation, and Project) you will now notice that when you click on the mdkBIM icon in the Account Manager on the Medeek website that the renewal price will appear instead of the regular "new" price. In other words you can purchase a new mdkBIM bundle (all five licenses) at the renewal price.

Note, that this is technically not a renewal of any of your licenses, it simply allows you to purchase new licenses at the discounted (renewal) price. For those who are wanting to sync up all their licenses to the same renewal date this is a convenient solution. However, note that if time is remaining on any existing licenses it is not applied to the new licenses.
#9
Medeek Electrical Plugin / Re: Development and Updates fo...
Last post by Medeek - February 07, 2025, 04:19:13 PM
Version 1.4.8 - 02.07.2025
- Added "hvac" under misc. fixtures.
- Added four generic hvac condensor units/sizes into the built-in library: 30X28, 30x32, 30x40, 36x32.

#10
Medeek Electrical Plugin / Re: Development and Updates fo...
Last post by Medeek - February 07, 2025, 02:30:08 AM
I've had some call for AC condenser units, so I'm going to create some very generic low poly models to add into the built-in library.
Here is my first crack at a 30x30x40 unit (it is a solid group):
elec_su258_800
Let me know if there are any particular sizes or geometries you would like to see added.