News:

SMF - Just Installed!

Main Menu

Recent posts

#1
Medeek Floor Plugin / Re: Development and Updates fo...
Last post by Medeek - June 18, 2022, 03:41:46 PM
Looks like I've got most of the basic Global Settings all put together now. Fairly basic to start with, I'm sure as this progresses it will diverge from the initial template quite a bit:

#2
Medeek Wall Plugin / Re: Development and Updates fo...
Last post by Medeek - June 10, 2022, 12:18:25 PM
Tutorial 30 - Double Brick Walls (9:32 min.)

#3
Medeek Floor Plugin / Re: Development and Updates fo...
Last post by Medeek - June 07, 2022, 08:27:34 PM
I've finally wrapped up my recent move (Utah -> Missouri) and the dust is beginning to settle some.  The next few weeks I will be working in earnest on the Floor plugin and try to get it put together and released before the end of the summer and prior to the upcoming SketchUp Basecamp. 
#4
Medeek Wall Plugin / Re: Wall and Window combinatio...
Last post by Medeek - June 06, 2022, 04:01:32 PM
Awesome and I am glad to hear you are getting some real world utility out of this plugin.
#5
Medeek Wall Plugin / Re: Development and Updates fo...
Last post by Medeek - June 06, 2022, 04:00:03 PM
Version 2.8.9b - 06.06.2022
- Fixed a bug with trimmer studs for garage doors.


!!!! CRITICAL BUG FIX !!!!
Note that if you are using more than two trimmer studs on your garage doors you will get an error and your garage door will not be drawn.  Update to this latest version to fix this bug with the garage door module.

This bug has existed for some time and I was probably not aware of it or made aware of it until today because most garage doors don't use more than two trimmers/jack studs.  However, it is still strange to me how long it was able to slip by unnoticed.
#6
Medeek Wall Plugin / Re: Wall and Window combinatio...
Last post by eecho789 - June 06, 2022, 12:09:16 PM
That worked like a charm! Thank you!  I now have 3 full designs and builds that I've used with this software.  With another planned for next year.  Thanks again! 
#7
Medeek Wall Plugin / Re: Development and Updates fo...
Last post by Medeek - June 05, 2022, 07:46:31 PM
Version 2.8.9 - 06.05.2022
- Added a "resolution" parameter into the General tab of the Global Settings for adjusting the smoothness of annotation text.





By default this parameter is set to 0.5 which may be a bit choppy/pixelated for some.  For maximum smoothness set this parameter to zero (as shown above).
#8
Medeek Truss Plugin / Re: Development and Updates fo...
Last post by Medeek - June 04, 2022, 11:53:04 PM
Version 3.1.6 - 06.05.2022
- Enabled ceiling insulation for common trusses: Batt, Blown-in.
- Enabled ceiling insulation for monopitch trusses: Batt, Blown-in.
- Added an insulation layer in the global settings.







I still have a lot of work with regards to insulation and numerous other truss types and rafter roofs.
#9
Medeek Wall Plugin / Re: Development and Updates fo...
Last post by Medeek - June 02, 2022, 10:30:24 PM
Version 2.8.8 - 06.02.2022
- Added Simpson Strong-Tie "High Strength" wood shearwalls to the SSW module: 24", 18" and 12".



I don't think the older Simpson wood shearwalls are available for purchase anymore from Simpson but I left them in just in case someone has a need for them.
#10
Medeek Wall Plugin / Re: Development and Updates fo...
Last post by Medeek - June 02, 2022, 03:15:46 PM
There entire WSWH Strong-Wall series is now available in the warehouse:

https://3dwarehouse.sketchup.com/model/266431e3-09d5-4859-a61f-9657bc809e9b/WSWH-Simpson-Strong-Walls