Development and Updates for the Medeek Electrical Plugin

Started by Medeek, January 24, 2019, 03:46:14 PM

Previous topic - Next topic

0 Members and 10 Guests are viewing this topic.

Medeek

Version 1.4.4 - 06.17.2024
- Added the "Draw Service Entrance" function to the primary toolbar.
- Enabled the ability to draw service entrance devices: CSED and Meter Socket.





For the callout and 2D symbol I'm not really sure what I should use, for now I'm showing the device part number and a simple rectangle.  Any thoughts or suggestions in this regard will be appreciated.
Nathaniel P. Wilkerson, P.E.

Medeek

Per customer request I also think it would be pertinent to add some disconnect/switches to the misc. tool. Typically in residential applications you will see these mounted externally for AC equipment or hot tubs. The more common ones are not too expensive so I thought it would be instructional to actually put my hands on some of these devices to better understand them and also for more accurate modeling reasons.





This is the 60A Square D QO200TRCP. I'm actually surprised at how sturdy this little enclosure is.
Nathaniel P. Wilkerson, P.E.

Medeek

Version 1.4.5 - 06.19.2024
- Added "disconnect switches" under misc. fixtures.
- Added a twin meter socket to the built-in library.
- Updated the Legend tool to include service entrance devices.
- Updated the Electrical Estimating module to include service entrance devices.
- Added voltage and amperage as parameters for service entrance devices.
- Changed the label text for service entrance devices to voltage and amperage.





Nathaniel P. Wilkerson, P.E.

Medeek

Version 1.4.6 - 06.22.2024
- Added "generators" under misc. fixtures.
- Added "water heaters" under misc. fixtures.
- Added a variety of other common electrical devices categories under misc. fixtures.



Nathaniel P. Wilkerson, P.E.

Medeek

Nathaniel P. Wilkerson, P.E.

Medeek

Version 1.4.7 - 07.18.2024
- Added combined "smoke/CO" detectors under safety devices.
- Updated the Legend tool to include combined smoke/CO devices.



The included device in the smoke/CO library is a KIDDE 30CUDR. Just bought this one yesterday and modeled it this morning.

https://www.amazon.com/dp/B0CX664SNZ

Note the 2D symbol text for this type of device is "SC".
Nathaniel P. Wilkerson, P.E.