News:

SMF - Just Installed!

Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - Medeek

#2146
The flat double pitched truss allows for a user driven asymmetric ridge location as well as differing left and right heel heights.  This opens up virtually any possible truss geometry even a negative pitch if one is so inclined:



#2147
The flat truss is the first new truss type added to the plugin in 11 months.  This brings the total number of truss types to approximately twenty two depending on how you classify the variants of the flat truss:



View model here:

https://3dwarehouse.sketchup.com/model/317af74e-a52c-470b-a612-1ba7c06617f0/Medeek-Truss-Yard-4
#2148
Here is an example of a small commercial building with a flat truss roof (parapet):



Download model here:

https://3dwarehouse.sketchup.com/model/d8413377-4287-4fb3-99b9-3d200441a2fe/Commercial-Building
#2149
Version 1.9.0 - 05.27.2017
- Added flat truss type, configurations: flat, monopitch, pitched.
- Metric input enabled for flat truss types.
- Added gable end trusses for flat truss types.
- Enabled the following end details for all flat truss types: None, Overhang, Cantilever, Mansard, Parapet, Mansard w/ Parapet.



Plates and advanced options are still in progress.  With the amount of configurations available with this truss type it will probably be a while before these next elements are in place.

The flat truss type is very configurable and with a little adjustment of parameters you can also easily create a (non-attic) gambrel truss using the flat pitched option.
#2150
All the end details are working.  This is an example of a Mansard Parapet truss with 5 panels and different overhangs:



Now I just need to work on the plates and advanced options.
#2151
I've got to fix my wife's computer today so that will probably stop me from getting any real meaningful work done on the plugins but at least I've been able to throw together a first draft for the office I want to build.  Any thoughts on improving the design, sometimes once you get an idea in your head it is hard to see outside the box.











I haven't shown the doors or the front porch which will probably be quite small and pressure treated lumber.

- 32'x24'
- 5:12 or 6:12 roof with asphalt shingles
- two rooms
- 9' ceilings
- stemwall foundation with crawlspace
- carpet throughout
- 5/8" wallboard
- 3068 doors, (1) 4040XO, (3) 5040XO
- 11-7/8" I-Joists at 16" o/c
- studs DF No. 2, 2x6 @ 16" o/c
- sheathing will probably be 1/2" plywood, I don't like OSB in our climate.
- Siding Hardiplank or cedar siding, my budget may call for T11 though.
- Electric wall cadet heaters
- 50 AMP sub-panel from house
- 16" overhangs at eaves and gables with gutters and downspouts and 4" drain lines away from building.
#2152
I'm trying to figure out the correct way to frame the stairwell as it joins up with the floor diaphragm above. 



It's hard to show exactly what I mean with sectional views, the best thing is to view the 3D model and you will see what I am talking about.


https://3dwarehouse.sketchup.com/model/c44b3423-611d-4dac-be93-4cf1cc072891/Stairs-1

I am working on the polygon and hole tool for I-Joist and Solid Sawn floors.  When you actually frame out this opening would you just use rimboard around the perimeter as I have shown?
#2153
Medeek Truss Designer / Load Limits
May 09, 2017, 02:04:43 PM
I have increased the limits of the top and bottom chord loads.
#2154
Starting to think about the parameters of the Medeek RC Plugin starting with columns. 

Here is an example of a typical rebar cage.  Given the longitudinal bar spacing this column would require additional ties for the middle bars.



View model here:

https://3dwarehouse.sketchup.com/model/8cd4dea1-701b-42c6-baa0-2f3fd958de2d/RC-Column

The icon or logo for this plugin will be.

Medeek RC Plugin Icon:

#2155
Some common configurations of concrete columns:

#2156
Version 1.1.2 - 05.06.2017
- Added "Circle Segments" option within the global settings, rebar and mesh polygon counts can now be controlled.



In this example I set the segment number to "5".

The global setting circle segment number will default to 24.
#2157
Recently I've received a number of requests for concrete columns to be added to the foundation plugin:



I'm still trying to figure out how to best add a concrete column module, I think it could gain some serious traction.  This would cater more to the industrial rather than the residential side.

I'll use ASDIP Concrete Software as a guide in establishing the various options to include:

#2158
Version 1.8.9 - 05.01.2017
- Added energy/raised heels for triple fink truss (3 variant: wedge, slider and vertical w/ strut).
- Metal plate connectors now enabled for triple fink trusses.

#2159
The hip truss portion is about 60%.  Between being busy at work and recuperating from my surgery I'm still not 100%, but I do plan on working on the hip truss module next.  That is definitely high on the priority list.
#2160
**Fun with Roofs - Episode 1**

My 9 year old son took one look at this roof and then said "Don't build this in Florida, you'll create a sink hole".











View model here:

https://3dwarehouse.sketchup.com/model/2032fed3-cb9b-40c4-80b1-be1009b3f022/Residence-8