News:

SMF - Just Installed!

Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - Medeek

#2206
Working on 2 ply and 3 ply headers as well as LSL headers:

#2207
Version 1.8.5b - 02.23.2017
- Addressed minor bug with "Front Only" gable end scissor trusses.
- Addressed minor bug with soffit cuts and TJI rafter roofs with dual glulam beams.
#2208
Trying out the Rayelectron Rendering plugin, I'm fairly impressed.



#2212
Version 1.8.5 - 02.18.2017
- Enabled roof cladding for dutch gable and TJI rafter roofs.
- Added TJI rafter roofs with dual glulam beams.
- Added Soffit Cut within Advanced Options for TJI Roof w/ GLB.



View model here:

https://3dwarehouse.sketchup.com/model.html?id=82a033b2-acc6-4216-a04c-f3707c68a49e

First new roof type in added in quite a while.  Lately I have been focusing most of my effort on cleaning things up and making sure all the options are working correctly for each roof type and configuration.

Soffit cuts with TJI (I-Joist) rafters gets a bit interesting but I've finally implemented it:

#2214
To create this roof was not an entirely automated process but I'm slowly getting there.  The trim tool comes in really handy for creating valley and jack rafters but ultimately it would be nice to auto create L-Shaped, T-Shaped and U-Shaped roofs.



View model here:

https://3dwarehouse.sketchup.com/model.html?id=28c0e0f9-a245-4ff9-a923-f8c268bc9828
#2215
Version 1.8.4 - 02.14.2017
- Enabled roof cladding for gable and hip rafter roofs.
- Roof slope can be toggled between Pitch or Degrees (input) for gable and hip rafter roofs in the global settings.
#2216
Version 1.8.3 - 02.12.2017
- Enabled metal plate connectors, materials and custom layers for Fan trusses.
- Added energy/raised heels for Fan truss (3 variants: wedge, slider and vertical w/ strut).
- Roof slope can be toggled between Pitch or Degrees (input) for common trusses in the global settings.



Currently the metric template forces the roof slope to degrees however in the imperial templates (inches, feet) the user can select between Pitch or Angle for common truss types.  I will need to update all of the truss types with this global setting option.
#2217
The common fan truss now has raised heels, plates, materials and layers:



I apologize for the slow progress.  I've had some 12 hour work days last week so I didn't have much left in the tank once I got home, usually just eat and then went straight to bed.
#2219
Actually I would change the name of the Fan Fink to Double Fan.

The next size up would be:

Quad Fan 10/5
Double Mod Fan 10/6
Triple Fan 10/7
Quad Queen 10/8
Quad Fink 10/9
Quad Howe 10/10

As the number of panels increase in the top chord the number of potential variations increases.  So for a four panel top chord truss the number of variations is three, the general pattern is:

(2/x) truss = 1 possible configuration
(4/x) truss = 3 possible configurations
(6/x) truss = 4 possible configurations
(8/x) truss = 5 possible configurations
(10/x) truss = 6 possible configurations
(12/x) truss = 7 possible configurations
...
#2220
I'm quite familiar with all of the industry names for various configurations of roof trusses (ie. Fink, Howe, Mod Queen, King Post, Queen Post, Double Fink etc...)  What distinguishes these trusses from each other is the configuration of the webs of the truss which is dictated by the number of panels of the top chords and bottom chords.  For example the Howe truss is four top chord panels and four bottom chord panels (4/4).  Most diagrams show up to a Triple Howe truss (8/8).  What is not typically shown is an (8/6) and (8/7) truss, is there any reason for this?  These two configurations seem perfectly valid to me, I would call them a Triple Queen and Fan Fink truss respectively.  Has anyone come across either of these two configurations?