Development and Updates for the Medeek Wall Plugin

Started by Medeek, March 04, 2017, 08:59:31 PM

Previous topic - Next topic

0 Members and 61 Guests are viewing this topic.

Medeek

Version 3.7.0 - 07.25.2024
- Added a duplicate wall check to the regen module for all wall types.

Tutorial 51 - Duplicating Walls (6:15 min.)

Nathaniel P. Wilkerson, P.E.

Medeek

Version 3.7.1 - 09.17.2024
- Added a vertical offset parameter for in-wall column king studs.



In the case where you have a beam pocket and king studs over top of a door or window this update is critical.  Previously the king studs would simply project to the bottom plate in the wall passing through the opening.  Now you can utilize this extra parameter to vertically offset these king studs the same way the column itself is offset.  Note that the offset can be both positive or negative or zero (default)
Nathaniel P. Wilkerson, P.E.

Medeek

Nathaniel P. Wilkerson, P.E.

Medeek

Is 8,000 sqft too large? I'm going to say yes, at least for most people.



Besides the regular mdkBIM plugins I also used the grid tool (Medeek Project), but the regular SketchUp grid tool works just as well. A grid tool is a requirement in my opinion, you really need something like this for laying things out correctly.

I also used TIG's mirror tool for certain manual modeling tasks.

The trim and extend tools in the Medeek Project were also very handy for creating my diagonal braces.
Nathaniel P. Wilkerson, P.E.

Medeek

View model here (note that interior framing is not complete for basement and 1st level).

app.sketchup.com/app?3dwid=7375ba27-467b-4e89-9b9a-42dfee593e51
Nathaniel P. Wilkerson, P.E.