Quote from: Irunfree on March 25, 2021, 03:37:27 AM
Using parallel projection and top down view, I turned off all the tags except "wall_symbol" and "wall_2d" and that gives a basic floor plan which it nice because you can create a scene for this and not use section cuts.

But there a few things that would need to change to look like a traditional floor plan, like the intersecting line where walls meet and the wall lines through the door opening. I turned on "remove wall lines" in the global settings that removed the intersecting lines where wall meets, but that leaves the 3D view of the walls without the lines it needs.

Is there any tweaks to using the plugin to easily get a traditional 2D floor plan? I have tried a variation of tag visibility, section cut and styles, but haven't gotten it to work yet.

Can you post a couple screen shots showing the issues, I will certainly give this some thought and see if I can come up with a solution.

Version 2.8.2 - 03.24.2021
- Added additional pitches to the shed and shed w/ ledger draw menus.

Version 2.0.0 - 03.21.2021
- Fixed a bug with the gypsum (cutout) where a half wall tees into another wall.

Here is an issue with half walls that tee into other walls.  Notice how the gypsum is being cut:



Let's see if I can adjust the gypsum module to rectify this particular situation.

Quote from: mrramsey on March 21, 2021, 08:42:21 AM
Will tHIs plug-in be part of the BIM package?

Yes, it will be the 4th plugin within the mdkBIM bundle.

Version 1.9.9 - 03.20.2021
- Added the ability to create custom "Log" wall cladding materials within the Material Library.
- Enabled "3D" Log wall cladding for all wall types: Rectangular, Gable, Shed and Hip.







View model here:

https://3dwarehouse.sketchup.com/model/a9bea507-7bcf-4355-b7c9-9a6d3e2deeb8/Log-Wall-Siding?tab=general

I've had some recent interest in a log siding/cladding similar to the shiplap cladding I enabled recently:



Thoughts?

This seems to be an artifact with SketchUp.  However, a good rendering software should not allow the studs to show through one would think.

Version 1.6.8 - 03.14.2021
- Standardized the naming convention of the plugin toolbars.

Version 0.8.0 - 03.14.2021
- Created the Medeek Engineering Plugin, utilizing SketchUp's Ruby API (BETA release).

I haven't paid much attention to this plugin for about 8 months as I have been so busy updating all of the other plugins (Wall, Truss, Foundation and Electrical).  When I get some more time I will get back to work on the matrix analysis engine that is required for the calculation module.  For now you should be able to add loads and supports to beams created with the beam module of the Medeek Wall plugin.

The plugin is very much in BETA right now, however I wanted to at least get it out so people can start playing with the load and support tools and give me any feedback they might have.

The BETA/Trial version of the plugin can be downloaded here:

http://design.medeek.com/resources/medeekengineeringplugin.pl

Note, that you cannot purchase this plugin yet.  I will not enable purchasing until I have completed the calculation module and brought it out of BETA status.

So far I have three people who are eligible for the drawing on the 24th, I'm not really seeing much interest so let's up the stakes a bit. If you post a project using any of the plugins within the next thirty days (Mar. 1 - Apr. 15) you are entitled to a one year upgrade on any and all licenses that you have purchased.

So the drawings are cancelled and I'm just going with "Post a Project, and Win a Prize".

Version 2.8.1 - 03.13.2021
- Standardized the naming convention of the plugin toolbars.

All of the Truss plugin toolbars will be prefixed with "Medeek", this will make it easier to find and sort through them, especially if you have a large number of extensions installed.

Version 1.9.8 - 03.13.2021
- Added an extra (Trim Top Plate) parameter to the "Start" and "End" configurations of rectangular walls.



**** CAUTION ****
This update adds two new parameters to the rectangular walls and will require the user to delete and recreate any rectangular wall presets.  This upgrade does not affect gable wall or any other presets (ie. windows, door, garage, gable wall, shed wall, hip wall).

This parameter (for the start and end of the wall) should normally be assigned to a value of "YES", this is also its default behavior.  However, in certain cases (such as a corner with a shed or gable wall) it may be useful to configure its value as "NO", as shown in the image above. 

Version 1.9.7 - 03.12.2021
- Fixed a bug involving gable, shed and hips walls that are created adjacent to rectangular walls.
- Fixed a minor bug involving regeneration of dissimilar wall types at the same type.

I'm always curious as to how people are actually using the plugins and to be honest I take a lot of phone calls and emails every day but rarely do I get to see the end result.  Mostly I deal with small issues and customers who are still getting oriented with the plugins or who are having a bit of trouble with the learning curve.

To encourage some (visual) feedback I am going to hold a **special drawing**.  Who ever wins the drawing will get a two year extension on all of their plugin licenses (Wall, Truss, Foundation and Electrical - approx. a $300.00 value).  To have your name/business entered into the hat you only need to have a licensed copy of one of the plugins and submit one post on the SketchUp forum or on this forum (with picture or pictures) showing a project you created with any one of the plugins (it doesn't have to be all of the plugins and it doesn't have to be a whole house design). To increase the odds of you winning and to provide more incentive for participation, I will draw three times, so there will be a total of three winners.   I will hold the drawings at 10:00 PM MST on Mar. 24th, so you have basically two weeks to make a submission.  I will post the winners of the drawing on this forum board.

*Note that educational licenses and trial licenses do not qualify for the drawing.  If your extension(s) license has expired that will not matter, I will add the two years to the Mar. 24th drawing date.  If you recently purchased the extensions then you will get two years added to your exp. update date.*

My primary intent is to be able to view some interesting projects created with the plugins and SketchUp.  I am now more firmly convinced than ever that SketchUp is the way forward and the  **future** of residential architectural design.

P.S.
If you post your project on the SketchUp forum please post in the appropriate category.  You can also post on this website forum as well here:  http://design.medeek.com/smf/index.php?board=2.0