News:

SMF - Just Installed!

Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - mqbeers

#16
I am not sure what a SKM library is. I guess I am not that advanced. For me just being able to reliably define a color in the Advanced menu would be fine. I think that white is a good default color for trim and one that I use all the time.
#17
Re: your color question - when I load the menu there is no default value in the box for Trim color and the behavior is the same for me whether there is a value in the field or not. I entered the #ffffff just to have something in the field to investigate whether that would affect the behavior. It did not.

Just weird as it worked well in the last iteration.
#18
Thanks Nathan. Here is the info:

Error: #<ArgumentError: Cannot find color named >
/users/mark/library/application support/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_wall_globals.rbs:706:in `color='
/users/mark/library/application support/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_wall_globals.rbs:706:in `check_user_materials'
/users/mark/library/application support/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_edit_rect_wall.rbs:345:in `block in show_edit_menu'
SketchUp:1:in `call'
Error: #<ArgumentError: Cannot find color named >
/users/mark/library/application support/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_wall_globals.rbs:700:in `color='
/users/mark/library/application support/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_wall_globals.rbs:700:in `check_user_materials'
/users/mark/library/application support/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_edit_rect_wall.rbs:345:in `block in show_edit_menu'
SketchUp:1:in `call'
Error: #<ArgumentError: Cannot find color named >
/users/mark/library/application support/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_wall_globals.rbs:700:in `color='
/users/mark/library/application support/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_wall_globals.rbs:700:in `check_user_materials'
/users/mark/library/application support/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_edit_rect_wall.rbs:345:in `block in show_edit_menu'
SketchUp:1:in `call'
Error: #<TypeError: no implicit conversion to float from nil>
/users/mark/library/application support/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_wall_exttrim.rbs:1580:in `pushpull'
/users/mark/library/application support/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_wall_exttrim.rbs:1580:in `draw_trim_geometry'
/users/mark/library/application support/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_rectangular_wall.rbs:2107:in `draw_selector'
/users/mark/library/application support/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_rectangular_wall.rbs:1907:in `main_menu'
/users/mark/library/application support/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_rectangular_wall.rbs:5353:in `calculate_obj'
/users/mark/library/application support/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_rectangular_wall.rbs:5372:in `update_state'
/users/mark/library/application support/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_rectangular_wall.rbs:5398:in `onLButtonDown'
Error: #<TypeError: no implicit conversion to float from nil>
/users/mark/library/application support/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_wall_exttrim.rbs:1580:in `pushpull'
/users/mark/library/application support/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_wall_exttrim.rbs:1580:in `draw_trim_geometry'
/users/mark/library/application support/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_rectangular_wall.rbs:2107:in `draw_selector'
/users/mark/library/application support/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_rectangular_wall.rbs:1907:in `main_menu'
/users/mark/library/application support/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_rectangular_wall.rbs:5353:in `calculate_obj'
/users/mark/library/application support/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_rectangular_wall.rbs:5372:in `update_state'
/users/mark/library/application support/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_rectangular_wall.rbs:5398:in `onLButtonDown'


I set the trim color to #ffffff.
#19
Good day Nathan.

I have downloaded and installed the latest Wall - 0.8.3 and am having a few difficulties. In order, they are:

1. When drawing walls with Advanced=Off, the walls appear as they should, and I am able to continue from the end of the previous wall with drawing my walls. When I invoke the Edit Wall Assembly command, the configuration menu appears, I turn on Advance, work my way through the cladding, etc., and then click on update. Nothing happens, no changes are made to the selected wall. I also clicked on Save Preset, entered a new name, then closed the Edit Menu. When I reopen the Edit Wall command, in the drop down at the top I select my preset, click on Load, then Update and again - nothing happens.

2. When drawing new walls with Advanced=On, and working my way through the various setting, then starting to draw my walls, the first wall is fine. However, the second wall starts from the same place as the first wall no matter which direction I attempt to go. The walls simply pile up on top of each other. I have attached a screen shot showing the cursor behavior. This occurs whether I have selected "Line" or "Polyline" in the menu. If I terminate drawing the wall, then re-invoke, no matter which point I select the wall is drawn from the origin point of the first wall in the project.

This all worked before, so I am unclear on what to do to fix it.

Before installing the latest update, I did uninstall the previous version using the Extension Manager, and then close and reopen Sketchup, install the new version using the Extension Manager, then proceeded to use the plugin.

Thanks for your attention.

Mark Beers