News:

SMF - Just Installed!

Main Menu

Recent posts

#1
Medeek Electrical Plugin / Re: Development and Updates fo...
Last post by Medeek - Today at 02:30:08 AM
I've had some call for AC condenser units, so I'm going to create some very generic low poly models to add into the built-in library.
Here is my first crack at a 30x30x40 unit (it is a solid group):
elec_su258_800
Let me know if there are any particular sizes or geometries you would like to see added.
#2
Medeek Wall Plugin / Re: Development and Updates fo...
Last post by Medeek - February 06, 2025, 11:18:45 PM
Version 3.8.8b - 02.06.2025
- Added the option for closed stringers.



#3
Medeek Wall Plugin / Re: Development and Updates fo...
Last post by Medeek - February 06, 2025, 03:39:51 PM
Version 3.8.8 - 02.06.2025
- Added landing treads, tread covers, carpet and stair runners for a winders.
- Added an SIP wall framing option for all wall types.
- Added five additional SIP parameters into the wall Draw and Edit menus.

Tutorial 66 - SIP Walls (8:03 min.)

#4
Medeek Wall Plugin / Re: Development and Updates fo...
Last post by Medeek - February 03, 2025, 08:10:50 PM
The lifetime licensing options are now permanently listed on the website:

http://design.medeek.com/resources/medeekwallplugin.pl#mdkBIM

#5
Medeek Wall Plugin / Re: Development and Updates fo...
Last post by Medeek - January 29, 2025, 10:43:19 PM
Just a few more loose ends before I jump back to the Floor plugin.

I would like to enable landing treads for winders, but things get a little interesting when the min. winder length is set to zero.  Does this look okay?



#6
Medeek Wall Plugin / Re: Development and Updates fo...
Last post by Medeek - January 29, 2025, 12:46:35 PM
Version 3.8.7b - 01.29.2025
- Fixed a bug with the baluster options.
- Enabled a zero stringer option for floating stairs.

#7
Medeek Wall Plugin / Re: Development and Updates fo...
Last post by Medeek - January 28, 2025, 06:48:30 PM
Version 3.8.7 - 01.28.2025
- Enabed subtractive geometry for all stair assemblies.
- Added the following two parameters to the baluster sub-menus: Baluster Type (Square, Round, Glass, Cable), Baluster Height.
- Enabled intermediate posts for both glass and cable railing.
- Added the following cable railing options into the Stairs tab of the Global Settings: Cable Railing Spacing, Cable Railing Diameter.
- Added a bottom vertical offset parameter for bottom posts of a stair run.





Tutorial 65 - Cable and Glass Railing (13:26 min.)

#8
Medeek Wall Plugin / Re: Development and Updates fo...
Last post by Medeek - January 25, 2025, 10:47:20 PM
Tutorial 64 - Modern Stairs (12:43 min.)

#9
Medeek Wall Plugin / Re: Development and Updates fo...
Last post by Medeek - January 25, 2025, 08:50:23 PM
Version 3.8.6 - 01.25.2025
- Added tread covers, carpet and stair runners for T-shaped landings.
- Enabled the option for a single stringer (for modern style stairs).
- Added an option to disable the placeholder for landing/winder framing.
- Added a "GLASS" option for balusters within the built-in baluster materials.
- Added a "None" built-in option for the handrail profile parameter.





#10
Medeek Wall Plugin / Re: Development and Updates fo...
Last post by Medeek - January 21, 2025, 11:37:08 PM
Tutorial 63 - Stair Runners and Tread Covers (10:06 min.)