Version 2.2.1 - 06.28.2021
- Fixed a bug with right handed shed walls and blocking.
- Mid-span blocking is now notched out for "California Corner" studs.

There have been over 189 revisions or releases of the plugin since it all started so be sure to check the changelog to make sure I haven't already enabled a feature you might be considering. I often refer to this page myself in order to keep track of what has been done and what hasn't, the number of updates and revisions is simply too large now to keep track of in one's head:

http://design.medeek.com/resources/pluginchangelog.html

The last year or so I have been focusing a lot of my efforts on the Wall plugin even though I have released many updates for the other plugins along the way.

That being said I am still surprised out how far behind I am with a lot of stuff within the Truss plugin.  For one thing the various (truss) hip sets are still not parametric nor do they have labels enabled.  There is still an incredible amount of work that needs to be done with this extension/plugin and that is in addition to the complex roof module and all that it entails.

The last few days you may have noticed that I have been doing a little house cleaning and enabling edit menus and subtractive geometry for the various assemblies within the plugin.  The list of incomplete truss and rafters types is still large so much work remains to be done.

The current TODO list is the following:

1.) The valley set module has not been updated in many months/years and needs a parametric update as well as other options such as a rafter framed option (California Valley Set).

2.) The floor truss module needs an option to disable the chase or even better the ability to enable any number of chases.

3.) Hip sets (trusses) should also be able to be asymmetric, which is actually a huge undertaking to program.

4.) The complex roof module is begging for my attention and really needs the rafter framing module completed.

5.) A lot of the more exotic truss types have yet to be completed and advanced options and parametrics are still waiting.

6.)  The dormer module is still mostly incomplete by anyone's standards.

7.) Subtractive and additive geometry needs to be enabled for all roof and floor assemblies.

8.) Stats and integration with the Medeek Estimator needs to be setup for every roof, dormer and floor assembly.

9.)  The floor truss module needs an option for configurations other than the Mod Warren.

10.)  I would like to add TriForce's Open Joist to the floor module.

11.)  Labels and other annotations (framing callouts) need to be enabled for every assembly, some are done but many are not.

12.) Soffit and Fascia options need to be enabled for truss hip sets and all other applicable assemblies.

13.)  A gypsum ceiling option might be nice for floor assemblies.

14.)  3D materials as defined in the Wall plugin need to be made available in the Truss plugin for gable wall cladding.

15.)  I have a lot of people asking for language options, for all the plugins, but mostly for the Truss plugin.

16.)  Ridge cap option for valley sets.

17.)  Many of the current menus can be switch to more attractive HTML menus and should be switched.

18.)  More parameters and defaults need to be exposed in the global settings.  Notice how much more expansive the Wall plugin's global settings is in comparison.  I could easily spend two or three months just updating this part of the plugin.

This list is by no means exhaustive but it does highlight the most obvious deficiencies with the plugin.

I'm really not sure how long it will take me to get all of this done but it does need to get done, and I can push out an update about two to three times a week.

Please feel free to chime in and add to this list if you see I am missing something that is a major thorn in your side or even something that would drastically improve your workflow.

Version 2.8.9 - 06.26.2021
- Added a "Regen" context menu item for floor truss assemblies.
- Enabled subtractive and custom geometry for floor truss assemblies.
- Enabled the edit function for floor truss assemblies.

A live stream this morning with Artisan Tony:

Version 2.8.8 - 06.24.2021
- Added a "Regen" context menu item for all I-joist and lumber floor assemblies.
- Enabled subtractive geometry for I-joist and lumber floors.
- Enabled the "Edit Floor Assembly" function for lumber floors.



View model here:

https://3dwarehouse.sketchup.com/model/5de5b38f-9265-48ea-90e0-4e39a04592f5/Subtraction-Floor-Framing

About two years ago I brought the asymmetric gable and hip roofs online and there was quite a bit discussion at this time about the positioning of the ridge board when the pitches are asymmetrical:

https://forums.sketchup.com/t/medeek-truss/16452/846

As I'm looking at this now my feeling is that the correct way to handle this is NOT to have the ridge board center up on the sheathing, so essentially I think I have it WRONG, or at least not configured the way I think it should be.

I will be giving this some more thought, I really hate for the plugin to be incorrect or wrong, it just doesn't sit well with me.  Maybe I'm not entirely wrong with the way I currently have it but there are two ways to handle this situation, and I am now liking the other way a bit more.

To clarify I've shown the two possible framing configurations for an asymmetric gable below:

Version 2.8.7 - 06.23.2021
- Added stats (roof cladding, sheathing, drip edge, hip & ridge, rafters) for gable and hip rafter roofs which can be analyzed within the Medeek Estimator (Wall Extension) module.

Version 2.2.0 - 06.23.2021
- Added roof cladding, sheathing, drip edge, hip & ridge and rafters to the Medeek Estimator (gable and hip rafter roof assemblies).
- Added rafter labels for gable and hip rafter roofs within the Medeek Estimator.



*Note:  To have this new functionality work with the Truss plugin you will need to upgrade the Truss plugin to Version 2.8.7.

First look at a hip roof with rafter labels applied:

First look at "Rafter Labels" for a gable roof.  Note that the dimensions are given in inches rather than feet:

First look at the Medeek Estimator giving rafter lengths for gable and hip roofs:





Even a small hip roof has a lot of parts and pieces, I couldn't even fit the list of jack rafters within one screen shot.  The lengths on the hip rafters may not be exact but they should be within about an inch, so for estimating purposes that should be adequate for now.

There is still a lot more data that can be reported on (eg. soffit, fascia, sub-fascia, gutter, outlookers etc...)

*Note:  If you trim one of the rafters, it will give you the longest member length within that group for now, I still haven't figured out what I am going to do when a rafter is cut into two or more pieces.

Tutorial 21 - 3D Cladding (12:15 min.)

Version 2.1.9 - 06.20.2021
- Added the ability to create custom "Lap" wall cladding materials within the Material Library.
- Enabled "3D" Lap wall cladding for all wall types: Rectangular, Gable, Shed and Hip.

Tutorial 20: Custom and Subtractive Geometry (17:18 min.)