Recent Posts

Pages: [1] 2 3 ... 10
1
Ladies and Gentleman I give you... The Medeek Wall Plugin

http://design.medeek.com/resources/medeekwallplugin.html



Version 0.7.2 - 05.25.2018

Please do not use the plugin in its current state for any production work.  I am afraid that you may loose data given the potential for bug splats and other issues with the plugin being so newly minted.

Please keep  your ruby console open while using the plugin and feel free to cut and paste any issues to me via email.  As much explanation regarding any errors would also be helpful. 

To be honest I don't feel like I've tested the plugin out nearly enough especially while using metric templates however the pressure to release the plugin now, rather than later was quite overwhelming.

Tomorrow I will begin addressing bugs and also I will begin work on the new todo list.
2
Moving a wall with corner and tee intersections:

3
Medeek Wall Plugin / Re: Development and Updates for the Medeek Wall Plugin
« Last post by Medeek on May 23, 2018, 11:11:44 am »
After a few mind numbing hours of parameters the global settings are now up-to-date.  See a screenshot of the door tab below:



There are probably a few more additions that can be made to some of the tabs but I think we are good enough now for the initial release. 

I still have one major item that needs some attention:

Updating of the interior wall algorithm so that it properly detects "Tee" intersections.

I also need to update the door casing for interior walls and add the gypsum wrap for interior walls with framed openings that do not have a window or door installed (ie. plain opening), however these are minor items and can probably be attended to after the initial release.

I have some known issues with the "no frame" option that need to be addressed but should only require a few minutes to remedy.

I will start working on the "Tee" intersection algorithm tonight and hopefully wrap this up tomorrow.
4
Medeek Wall Plugin / Re: Development and Updates for the Medeek Wall Plugin
« Last post by Medeek on May 21, 2018, 11:01:23 am »
Working on updating the global settings to reflect the myriad of settings added to the plugin in the last month.

This is what you will see when you pull up the license tab with a fully licensed plugin:



Notice that there are twelve tabs:

- General (complete)
- Layers (complete)
- Materials
- Sheathing
- Walls
- Doors
- Windows
- Wall Corners (complete)
- Trim
- Insulation
- Holdowns (complete)
- License (complete)

The window and door tabs will have the largest amount of options.  Updating all of these html pages is rather tedious work but it is necessary.
5
Medeek Wall Plugin / Re: Development and Updates for the Medeek Wall Plugin
« Last post by Medeek on May 20, 2018, 04:50:16 am »
I've now enabled the "Install Mode" parameter which allows the user to use the "Builtin" window generator/plugin or use one of their own pre-configured windows stored within the "library" sub-folder of the plugin:



Notice that the insertion point can be specified as well as locating within the wall depth by two parameters: 

1.) Window Location:  ON SHEATHING or ON FRAMING, this parameter will offset the location of the window within the wall by the sheathing thickness automatically or place it inline with the wall framing.

2.)  The window location within the wall can be further modified/customized by adjusting the outset with either a positive or negative value.

One thing to note is that the framed opening has no idea what the dimensions of the window or door are, the user must provided the correct width and height for the installed window.  Also note that callout at the base of the wall does not include any specifics on the window installed when in library mode since it does not know whether the window is a picture, single hung, casement etc...

Since this particular library file already has the proper trim and casing as part of the component I have turned off these advanced features for this opening.  If it did not I could alternatively enable both the trim and/or casing within the plugin even though the plugin is not actually drawing the window itself (it is bringing in a third party component instead).

The plugin will automatically populate the library dropdown with any valid SketchUp files found within the sub-folder "library/windows/".

I am now working on the door modules to extend this functionality for doors.

I am also interested in working with other plugin authors so that I can establish an API which will allow the wall plugin to talk to their window/door plugin and automatically pass parameters back and forth so that opening location and size can properly sync with a third party plugin. 

You might also notice that there are two dots shown on the top plate at each end of the wall in this model.  This gives the user indication that holdowns are installed in this wall panel at these locations. In 2D mode these indicators will also be shown even though no hardware is drawn.
6
Medeek Wall Plugin / Re: Development and Updates for the Medeek Wall Plugin
« Last post by Medeek on May 18, 2018, 06:17:40 pm »
Straps, holdowns, anchor bolts, threaded rod and couple nuts are now part of the plugin.  More details on that later.  At some point the engineering module will be able to do the entire lateral calcs on a structure with the click of a button and input of a few site criteria parameters.  The idea is to fully automate the engineering of a residential structure, engineers shouldn't have to work this hard.





Tomorrow I will wrap up the global settings and we will release the plugin for beta testing.

I still have quite a bit more stability testing to make sure I have missed any glaring errors but I'm sure the beta testers will help sniff out a lot of those issues.
7
Medeek Wall Plugin / Re: Development and Updates for the Medeek Wall Plugin
« Last post by Medeek on May 16, 2018, 01:26:49 pm »


Window and Door callouts with the "2D Layout in 3D" option turned on.

Notice that I have parallel projection turned on  in SketchUp.

I apologize for the strange coloration and quality of the image, I'm trying out some new software for taking screen grabs and turning them into animated GIFs.
8
Medeek Wall Plugin / Re: Development and Updates for the Medeek Wall Plugin
« Last post by Medeek on May 16, 2018, 05:52:41 am »
Interior Walls:



A couple of items on today's todo list with regards to interior walls:

- The wall move tool decouples interior wall corners from exterior wall corners, this is intended.
- I still need to add in an algorithm which can sense when an interior wall is Teeing into an ext. or int. wall.  This is important primarily for the move tool and wall creation tool.
- Update interior door casing
- Interior windows (windows that are embedded in an interior wall) are not very common, not sure exactly what to do in this case.  Perhaps just treat as regular window installed in an exterior wall.
- Interior framed openings (without installation of door or window):  These need to be wrapped in gypsum to properly finish them out.
- Added interior trim (baseboard, crown molding, chair rail, wainscoting) to the long term todo list.

That should be it for now.  I may be able to get all this done today if I really hustle and then on to the global settings tomorrow.
9
Medeek Wall Plugin / Re: Development and Updates for the Medeek Wall Plugin
« Last post by Medeek on May 15, 2018, 01:11:51 pm »
A preview of the Wall Move Tool:



View Model here:

https://3dwarehouse.sketchup.com/model/7d00f6ec-e8a5-4ae9-a63a-9d16add4bd94/Framing-Test-21

The primary items left to do before the release are:

- Interior Walls
- Global Settings (update)
- Web Page (update)

I will start on interior walls tomorrow.

I also have some additional testing to do with the no framing option to make sure it is working seamlessly with the other modes (2D and 3D).
10
Medeek Wall Plugin / Re: Development and Updates for the Medeek Wall Plugin
« Last post by Medeek on May 15, 2018, 03:05:44 am »
One of many wall move permutations that must be considered:



I also still need to fully vett the non-orthogonal wall possibilities, this is exhausting work.
Pages: [1] 2 3 ... 10