News:

SMF - Just Installed!

Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - saakejam

#1
I used heel heights to fit facia lines and this was easy...  Just keep adjusting.  Hitting Update instantly moves geometry.
#2
2.2.3b

Trying to build/edit standard truss roof with battens and corrugated roofing like you did below... 
Clicking "Submit Advanced Options" does nothing.  Ruby script below appears.  I will try to uninstall/reinstall?


Error: #<NoMethodError: undefined method `name' for #<Sketchup::Face:0x007fdc98b2cc40>>
/users/cyclefanatic/library/application support/sketchup 2018/sketchup/plugins/medeek_truss_ext/medeek_load.rbs:314:in `block in <module:MedeekTrussPluginModuleLoader>'
SketchUp:1:in `call'
Error: #<NoMethodError: undefined method `name' for #<Sketchup::Face:0x007fdc98b2cc40>>
/users/cyclefanatic/library/application support/sketchup 2018/sketchup/plugins/medeek_truss_ext/medeek_load.rbs:329:in `block in <module:MedeekTrussPluginModuleLoader>'
SketchUp:1:in `call'
Error: #<NoMethodError: undefined method `name' for #<Sketchup::Face:0x007fdc98b2cc40>>
/users/cyclefanatic/library/application support/sketchup 2018/sketchup/plugins/medeek_truss_ext/medeek_load.rbs:341:in `block in <module:MedeekTrussPluginModuleLoader>'
SketchUp:1:in `call'
Error: #<NoMethodError: undefined method `name' for #<Sketchup::Face:0x007fdc98b2cc40>>
/users/cyclefanatic/library/application support/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_wall_load.rbs:637:in `block in <module:MedeekWallPluginModuleLoader>'
SketchUp:1:in `call'
Error: #<NoMethodError: undefined method `name' for #<Sketchup::Face:0x007fdc98b2cc40>>
/users/cyclefanatic/library/application support/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_wall_load.rbs:676:in `block in <module:MedeekWallPluginModuleLoader>'
SketchUp:1:in `call'
Error: #<NoMethodError: undefined method `name' for #<Sketchup::Face:0x007fdc98b2cc40>>
/users/cyclefanatic/library/application support/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_wall_load.rbs:696:in `block in <module:MedeekWallPluginModuleLoader>'
SketchUp:1:in `call'
Error: #<NoMethodError: undefined method `name' for #<Sketchup::Face:0x007fdc98b2cc40>>
/users/cyclefanatic/library/application support/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_wall_load.rbs:721:in `block in <module:MedeekWallPluginModuleLoader>'
SketchUp:1:in `call'
#3
I vote Both.
#4
Occurence #1

SU completely crashed when in the advanced options and the materials manager came up in an empty  dialog box.

Occurence #2

Started to edit a truss assembly.

File load error (/users/cyclefanatic/library/application support/sketchup 2018/sketchup/plugins/medeek_truss_ext/MEDEEK_WALL_HOLDOWNS.rbs): Could not find included file '/users/cyclefanatic/library/application support/sketchup 2018/sketchup/plugins/medeek_truss_ext/MEDEEK_WALL_HOLDOWNS.rbs'
Error: #<NoMethodError: undefined method `check_global_settings_gutters' for #<Class:0x007ffe74438aa8>>
/users/cyclefanatic/library/application support/sketchup 2018/sketchup/plugins/medeek_truss_ext/medeek_roof_truss_dictionary.rbs:268:in `create_dictionary'
/users/cyclefanatic/library/application support/sketchup 2018/sketchup/plugins/medeek_truss_ext/medeek_roof_truss.rbs:3209:in `draw_truss_selector'
/users/cyclefanatic/library/application support/sketchup 2018/sketchup/plugins/medeek_truss_ext/medeek_roof_truss.rbs:668:in `main_menu'
/users/cyclefanatic/library/application support/sketchup 2018/sketchup/plugins/medeek_truss_ext/medeek_roof_truss.rbs:4037:in `calculate_obj'
/users/cyclefanatic/library/application support/sketchup 2018/sketchup/plugins/medeek_truss_ext/medeek_roof_truss.rbs:4056:in `update_state'
/users/cyclefanatic/library/application support/sketchup 2018/sketchup/plugins/medeek_truss_ext/medeek_roof_truss.rbs:4064:in `onLButtonDown'

Noticed you can select corruated metal for both sheathing and cladding?  I wanted to have trusses without sheathing but with battens then corrugated metal as cladding.
Anyway, when in the edit truss screen, update will not produce changes.

Thank you for the additions to the truss plugin.  Long awaited.
#5
Excited to see the gable wall work!  Can I inject the next item will be custom materials for the Truss PI...  ;D
Great work lately...
#6
Good video...  Goods tips.  I have to say the best menus you have are ones that pop up illustrations hovering over the item selection.  Especially in the Truss selections.  Very helpful because we sometimes call components by other names or don't know the item by name.  I would employ this all over.

Since the anchoring fix I have been churning out work.  Not fast because I'm a novice.  I will be excited to see the new Truss custom materials selections come to life.  This leads me to ask if in the pipeline you will have a joist system plug-in to build floor decks?  Medeek Floor.. 🙂.  An outdoor deck system plugin?
#7
Only noticed on Mac.  Have not used Windows updated Ver. yet.
#8
0.9.8 fixed both Mac and Windows platforms...  The only item noticed was sometimes the menu dialog comes up blank (All White).  Not all the time and you can refresh the size which brings it back.
Not a big problem.
#9
Forum News / Setting Timezone for Members
October 15, 2018, 05:10:27 AM
Hello:  How do I Set the Timezone in my profile?
#10
Nathan:  As I was working on my Windows platform something broke.  I now am having the same problem as on the Mac. which is not resolved. (Thought to be a 3DConnexion driver update)

I can send you the .skp if that is something useful for troubleshooting.


Medeek Wall

Cursor will not anchor when needing to change direction.
This just started when changing parameters in the wall height??

Ruby Errors: Several attempts made to adjust outside of rebooting the computer which I will do now

Error: #<NoMethodError: undefined method `bounds' for nil:NilClass>
c:/users/kemo/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_wall_cornerconfig.rbs:60:in `block in check_corners'
c:/users/kemo/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_wall_cornerconfig.rbs:60:in `each'
c:/users/kemo/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_wall_cornerconfig.rbs:60:in `find_all'
c:/users/kemo/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_wall_cornerconfig.rbs:60:in `check_corners'
c:/users/kemo/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_rectangular_wall.rbs:2954:in `create_wall_geometry'
c:/users/kemo/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_rectangular_wall.rbs:2376:in `main_menu_html'
c:/users/kemo/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_draw_wall_tools.rbs:1472:in `calculate_obj'
c:/users/kemo/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_draw_wall_tools.rbs:1489:in `update_state'
c:/users/kemo/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_draw_wall_tools.rbs:1515:in `onLButtonDown'


Error: #<NoMethodError: undefined method `bounds' for nil:NilClass>
c:/users/kemo/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_wall_cornerconfig.rbs:60:in `block in check_corners'
c:/users/kemo/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_wall_cornerconfig.rbs:60:in `each'
c:/users/kemo/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_wall_cornerconfig.rbs:60:in `find_all'
c:/users/kemo/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_wall_cornerconfig.rbs:60:in `check_corners'
c:/users/kemo/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_rectangular_wall.rbs:2954:in `create_wall_geometry'
c:/users/kemo/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_rectangular_wall.rbs:2376:in `main_menu_html'
c:/users/kemo/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_draw_wall_tools.rbs:1472:in `calculate_obj'
c:/users/kemo/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_draw_wall_tools.rbs:1489:in `update_state'
c:/users/kemo/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_draw_wall_tools.rbs:1515:in `onLButtonDown'
#11
Great videos!  Very informative with many tips we may not have quite known about.  (Cursor placement, menu details)  Great marketing for you too...  Shows how  powerful your plugin really is.
I believe it's time to build the custom materials feature into the Truss plugin!   :) 
#12
Update on new Mac OS (Mohave) Issue and possible reason for odd behavior in Medeek Wall

I am using (2) 3DConnexion devices.  A SpaceNavigator Joystick device and a Cadmouse.  3DConnexion.com
I have noticed issues in their preferences page with grayed out and missing device information for devices connected on my Mac.
Not so in Windows 10.  In contacting a support tech they acknowledged the issue.  There has not been a driver update so far.
I'm expecting hopefully this will resolve the anchoring problems in MW.  I'll reply when 3DConnexion releases an update.

"3Dconnexion is working to add support for macOS 10.14 (Mojave) into the 3DxWare 10 driver. The loading of kernel extensions was modified in the latest version of Apple's operating system. Due to this fact 3Dconnexion has to make significant changes to the 3DxWare driver. Once the new driver is ready you can find it on our driver download site (http://www.3dconnexion.com/service/drivers.html). We are sorry for any inconvenience this delay may be causing to you."

With best regards,
Chad
3Dconnexion Technical Support
#13
Yes...  I tried my Windows machine and it was ok there.  Any clues from the error?  My preferred
Plateform having just upgraded recently.
#14
Wall will not anchor with mouse click to turn 90 deg...  Follows stuck to cursor until I esc.

Error from Ruby Console

Error: #<NoMethodError: undefined method `bounds' for nil:NilClass>
/users/cyclefanatic/library/application support/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_wall_cornerconfig.rbs:60:in `block in check_corners'
/users/cyclefanatic/library/application support/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_wall_cornerconfig.rbs:60:in `each'
/users/cyclefanatic/library/application support/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_wall_cornerconfig.rbs:60:in `find_all'
/users/cyclefanatic/library/application support/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_wall_cornerconfig.rbs:60:in `check_corners'
/users/cyclefanatic/library/application support/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_rectangular_wall.rbs:2950:in `create_wall_geometry'
/users/cyclefanatic/library/application support/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_rectangular_wall.rbs:2376:in `main_menu_html'
/users/cyclefanatic/library/application support/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_draw_wall_tools.rbs:1471:in `calculate_obj'
/users/cyclefanatic/library/application support/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_draw_wall_tools.rbs:1488:in `update_state'
/users/cyclefanatic/library/application support/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_draw_wall_tools.rbs:1514:in `onLButtonDown'
Error: #<NoMethodError: undefined method `bounds' for nil:NilClass>
/users/cyclefanatic/library/application support/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_wall_cornerconfig.rbs:60:in `block in check_corners'
/users/cyclefanatic/library/application support/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_wall_cornerconfig.rbs:60:in `each'
/users/cyclefanatic/library/application support/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_wall_cornerconfig.rbs:60:in `find_all'
/users/cyclefanatic/library/application support/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_wall_cornerconfig.rbs:60:in `check_corners'
/users/cyclefanatic/library/application support/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_rectangular_wall.rbs:2950:in `create_wall_geometry'
/users/cyclefanatic/library/application support/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_rectangular_wall.rbs:2376:in `main_menu_html'
/users/cyclefanatic/library/application support/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_draw_wall_tools.rbs:1471:in `calculate_obj'
/users/cyclefanatic/library/application support/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_draw_wall_tools.rbs:1488:in `update_state'
/users/cyclefanatic/library/application support/sketchup 2018/sketchup/plugins/medeek_wall_ext/medeek_draw_wall_tools.rbs:1514:in `onLButtonDown'
#15
Medeek Wall - 0.9.6c

Maybe Mac OS Issue - After update today when choosing to draw a wall I could not anchor the wall by clicking the mouse.  The wall would
only follow the mouse, not anchor and turn 90 deg....  Did the typical maneuvers - Restart, Uninstall/Reinstall, quitting after each,,,

No problem when using Windows 10 machine...   ??

Mac OS 10.14

Any mention of this yet?