Quote from: mqbeers on July 04, 2018, 05:11:57 PM
Thanks Nathan.
One other little thing occurred to me - I would find it helpful if there were more informative pop-up tool tips for all the various buttons for launching modules of the plug-in. I have not yet really gotten straight what all the buttons are for. Just something that I think would help user functionality. Not the end of the world, but would be a nice to have.

I've started adding tool tips into some of the menus and the global settings, I will keep adding more as I move forward.  I am also starting to work on the manual, but the tool tips take precedence over the manual since I feel that they are more accessible and useful to the user.

Preview of the updated Trim tab of the global settings.  I've organized it a little better into vertical and horizontal elements for the exterior trim:



I've also added the missing Wainscot Cut parameter and the new parameters for the Frieze and Skirt boards (with drip cap).

Quote from: mqbeers on July 04, 2018, 03:06:50 PM
Good news. I have tried all my previous actions and everything I have tried seems to work just fine. Wall Edit Menu updates are being applied as expected with no weird behaviors. New walls and additional walls added on to existing walls appear to work fine. I obviously have not tried all iterations, but so far looks good.

I do have a couple of observations/suggestions:

1. There does not appear to be a Global Setting for Wainscot Cut, so that has to be set every time in the Edit Wall function. A global setting for this would be welcome.
2. If you could allow/configure the Edit Wall function to be sequentially applied without having to close, reselect, and reopen the Edit Wall Menu again that would be very, very helpful and very good functionality. Maybe a button or something to update the selection?

Anyhow, I really appreciate all your work on this.

Thank-you for bearing with me on trying to eliminate the bugs.

Two excellent suggestions.  I also just realized that none of the wainscot settings are added into the global settings sheathing tab yet, the work never ends.

I've actually had a couple other people request the same functionality with the edit wall function, so this is now top priority, I am looking at it right now and I will see what I can do.

I'm a bit of a perfectionist, which I will readily admit can be my undoing sometimes.

The LVL edge texture was really bugging me so I created a slightly better one:



An 14" deep LVL 3-Ply beam with an HUCQ612 hanger.

Version 0.8.3c - 07.04.2018
- Release date and sub. revision numbers are now correctly reported in the global settings license tab.

I have not been able to duplicate the specific error you are having but I made some minor modifications to that specific section of the code.  Please download 0.8.3c and then try to duplicate the recent error(s).

I probably have not been able to duplicate the error because something in my advanced settings does not match something in yours, one of the parameters or a combination of parameters may be causing the issue here.  I will get to the bottom of it.

I'm looking at this right now.  Last night I updated the attribute dictionary module quite significantly in order to fix the previous issue.  In doing so I may have broken something else in the process.  I am currently trying to duplicate the error(s) you have shown below so I can squash this one.

Version 0.8.3b - 07.03.2018
- Fixed a bug with the wall edit menu so that it loads default global settings for advanced wall options as required.

Note that the band board can also be combined with wainscoting:

I think the plugin installation is fine, what you are seeing is that the advanced settings have not been set for that particular wall panel since it was created with advanced wall options turned off.  However, rather than display blank values when the various advanced options are turned on it should probably load up the default values from the global settings.


If you get a chance this afternoon call me at 425-652-4188 so you can describe more fully what you are seeing and I can verify what I think I am seeing.

Quote from: mqbeers on July 03, 2018, 01:06:26 PM
Re: your color question - when I load the menu there is no default value in the box for Trim color and the behavior is the same for me whether there is a value in the field or not. I entered the #ffffff just to have something in the field to investigate whether that would affect the behavior. It did not.

Just weird as it worked well in the last iteration.

I just uninstalled and reinstalled the plugin to make sure that I captured any changes in the latest release.  I'm still not getting this error.  Can you send or post a quick screen shot of the draw wall menu (basic options) and (trim).

I've been thinking about moving to an SKM based user library for material selection and assignment.  The only problem I see with this is that it would require SketchUp 2017 or newer so it would effectively end my compatibility with older versions of SU.

Quote from: mqbeers on July 03, 2018, 10:59:44 AM
Thanks Nathan. Here is the info:


I set the trim color to #ffffff.

What do you get if you just leave the trim color as default?


I'm not exactly satisfied with the way I have the whole material/texturing thing setup with assigning colors etc...  I think it might be better to just go with a user definable SKM library instead so that the designer/user can provide their own colors and materials, thoughts?

Can you turn on the ruby console and then copy and paste the error codes.  I'm not seeing any errors on my end but my settings may be slightly different than yours so I need to be able to duplicate the error in order to fix it.  The error codes will point me in the right direction.

Version 0.8.3 - 07.02.2018
- Added a band board option to the exterior trim module.
- The "band thru corner" option allows the band board to cut through the corner trim.

Its now been a little over a month since I released the initial BETA of the plugin:

http://design.medeek.com/resources/wallpluginchangelog.html

June has been a very active month, as documented by the changelog.

There is still a lot more to do and some small fires still exist so July should also be relatively busy month as well.

Wrapping up some loose ends and fixes are on the top of the list as is the gable wall module.  Fortunately, a lot of code for this new module will be recycling of existing code but due to the complexity of gable walls it will probably take a couple weeks to really pull it all together.

From a marketing stand point I am a little concerned with the interest level in the plugin.  I fully expect that the actual purchases of the plugin will still be low since it is still in a beta stage however I am surprised that more people are not at least downloading the plugin and trying it out.  This is cause for some concern. 

Any thoughts on lethargic response would be helpful.  I am always open to changing direction or marketing strategies if common sense or certain factors dictate it.

I apologize if the plugin is "too deep" for some, my intent is not to overwhelm or even over complicate things.  Unfortunately, buildings are complicated structures and as my previous post on exterior trim has shown even fully defining a sub-system within a structure can get a little crazy at times.  To be perfectly honest, a couple months in and I've only really scratched the surface.  The engineering and estimating and auto-layout modules are stilling waiting in the wings.

I don't think my pricing is too high or asking to much, but I realize it might still be a bit to bite off for some considering the current developmental state of the plugin.  I guess what you have to realize is that you are not paying for two or three months of coding you are actually purchasing everything I've done up till now plus two more years of full time development.  So I do think it will be good value for the money.

I also realize that the SketchUp community has a slightly different mentality than the rest of the design world.  We are used to a lot of quality plugins and even the SU software coming at no cost or a greatly reduced cost when compared with other drafting/design software and tools out there.  We are hesitant or unwilling to accept subscription type licenses (myself included).  With all that being said perhaps a different business model would meld better with the SU design community.  Any thoughts in this regard would be greatly appreciated, please send your comments directly to nathan@medeek.com.

I'll start with the band board.  The updated exterior trim menu now appears as so:



The band thru corner parameter causes the band board to cut through the corner trim boards and extend all the way to the corner (mitered).

The four additional parameters should be sufficient to fully define the band board.  The band board trim thickness is the same as the corner trim, I'm assuming that typically you would want these various trim boards to all be the same thickness?  If not then an additional parameter for the band board thickness is required.

By the time I add in all of the parameters for the frieze and water table the menu is going to get quite large, which can create problems for people working on laptops with small screens.  My only option at that point is to remove some variables from the draw wall tool ext. trim menu (still available in the global settings and wall edit menu) or go to an HTML menu.