Version 1.6.3 - 09.06.2020
- Added (segmental) arched garage doors to the garage door module.



I still need to add the option for dutch corners.

View model here:

https://3dwarehouse.sketchup.com/model/85fa4048-d169-4d16-9102-ac68aa9feaa7/Arched-Garage-Door

Version 1.6.2 - 09.01.2020
- Added three additional parameters to the "User Interface" section of the General tab of the global settings. This allows the customization (colors) of the HTML menus.

For completeness I think it would be a good idea to add the option for arched garage doors and dutch corners.  The algorithms for arched doors already exist within the man door module and the geometry of dutch corners is very simple.  Give me a couple of days and I will knock this one out.

Version 1.6.1 - 08.31.2020
- Added a footing offset parameter to polyline stemwalls.
- Enabled options for 90 deg. footing hooks for vertical rebar in polyline stemwall.



View model here:

https://3dwarehouse.sketchup.com/model/eb2be1c5-68b8-492a-a784-a31b68d46b5d/Asymmetric-Stemwall-Foundation

After giving this suggestion some additional thought:



I think I will introduce two additional parameters for stemwall foundations which will make them more applicable for use as retaining walls in foundation design.

The two parameters will be:

Ftg. Bar Development:  None, Hook, Full Ext., Full Int.
Ftg. Offset: 0.0 in (default)

Currently footings are drawn symmetrically with respect to the foundation wall, this will enable the user to offset the footing in or out (+/-).

The updated toolbar with the "Engineer Beam" icon added.

Tutorial 4: UK Toolbar

Version 1.6.1 - 08.26.2020
- All gable wall types (gable, hip, shed) now include the option to enter in the wall slope as a pitch or angle.

Version 1.6.0b - 08.23.2020
- Added the ability to create, load and delete garage door presets within the Edit and Draw (HTML) Menus.
- Fixed a bug with reading in presets from the door and window edit menus.

Version 1.6.0 - 08.23.2020
- Enabled variable king stud and trimmer stud widths for garage doors (non-portal frame).

A few years ago when I was heavy into the artwork:



http://wilkersonart.com/

Version 1.5.9c - 08.19.2020
- Fixed a floating point rounding error in the blocking and cavity insulation modules for all walls.



No bells and whistles tonight.  Sometimes it's just about putting out the fires.

Version 1.5.9b - 08.18.2020
- Fixed a bug with gypsum when applied to the end condition for interior shed walls.

Version 1.5.9 - 08.18.2020
- Added the "Basic Options" parameters to the Wall tab of the Global Settings.



I'm not sure why these parameters never got added to the global settings a long time ago but I guess better late than never.