News:

SMF - Just Installed!

Main Menu

Development and Updates for the Medeek Wall Plugin

Started by Medeek, March 04, 2017, 08:59:31 PM

Previous topic - Next topic

0 Members and 9 Guests are viewing this topic.

Medeek

Version 3.4.0 - 12.22.2023
- Fixed a minor bug with the error checking code for custom casing profiles of windows and doors.
- Added top and bottom vertical offset parameters for shearwall sheathing.
- Added a QHQ casement window to the window draw and edit modules.





Both updates are per customer request.
Nathaniel P. Wilkerson, P.E.

Medeek

Version 3.4.1 - 12.29.2023
- Updated and improved the license verification module.
- Disabled redundant logging to improve plugin performance.
Nathaniel P. Wilkerson, P.E.

Medeek

Version 3.4.2 - 01.09.2024
- Fixed a bug with steel framing and tee intersections.
- Fixed a bug with hip walls and tee intersections (two stud with blocking).
Nathaniel P. Wilkerson, P.E.

Medeek

Version 3.4.3 - 01.18.2024
- Improved the serial number verification logic within the License tab of the Global Settings.
- Added a Door Reset button in the Doors tab of the Global Settings.
- Added a Window Reset button in the Windows tab of the Global Settings.
Nathaniel P. Wilkerson, P.E.

Medeek

Version 3.4.4 - 01.24.2024
- Added a pressure treated option for in-wall columns.
- Created a more realistic material/texture for pressure treated timbers (for in-wall columns and posts).

Nathaniel P. Wilkerson, P.E.

Medeek

Version 3.4.5 - 01.28.2024
- Added two additional column types for in-wall columns: Custom, Blank.
- Three additional parameters added for custom in-wall columns.
- Added a custom label option and annotation section for in-wall columns.
- Updated the javascript logic within the License tab of the Global Settings.



Technically this update is a bit redundant because one can already configure custom in-wall columns within the global settings.  However, this new option gives one the ability to insert any sort of column into the wall (non-wood) as well as a blank opening where one could then insert their own manually modeled column or structural support.

The custom label option applies to all column types, so it can override the auto labeling algorithm of the module.

This update per customer request.
Nathaniel P. Wilkerson, P.E.

Medeek

Version 3.4.5b - 01.28.2024
- Fixed a bug with holdowns for in-wall columns.
- Fixed a bug with the bottom plate cutting algorithm for in-wall columns.
Nathaniel P. Wilkerson, P.E.

Medeek

Version 3.4.6 - 01.30.2024
- Added a "Dimension to Centerline" option for framing dimensions in the General tab of the Global Settings.
- Enabled centerline dimensioning for openings, columns and SSW for rectangular walls.
- Added a "Style 5" (Pull Plate) to the built-in door hardware options.
- Added more options for grid style window grilles: 3X4, 4X5, 5X6.







All updates per customer requests.
Nathaniel P. Wilkerson, P.E.

Medeek

Version 3.4.7 - 02.01.2024
- Updated the Columns tab of the Global Settings with new parameters.
- Added glazing color and opacity parameters to the Sheathing tab of the Global Settings.





The Columns tab now includes Custom and Blank under Column Type.

Up until now the glass color and opacity has been hard coded in to the plugin, now the user can adjust these values if desired.
Nathaniel P. Wilkerson, P.E.

Medeek

Version 3.4.8 - 02.04.2024
- Added a Sheathing Reset button in the Sheathing tab of the Global Settings.
- Added Dimension Layer 5 specfically for framing/elevation auto-dimensions (Layer tab of the global settings).
- Enabled editing of dimensions for framing/elevation dimensions (rectangular walls only).






Tutorial 46 - Editing Framing Dimensions (7:34 min.)

Nathaniel P. Wilkerson, P.E.

Medeek

Version 3.4.9 - 02.16.2024
- Added an RGB color code input into the Add, Update and Import menus for custom materials.
- Added an RGB color code input for each color in the Materials tab of the Global Settings.
- Added a "Toggle RGB Input" button to the Materials tab of the Global Settings.





Updates per customer request.
Nathaniel P. Wilkerson, P.E.

Medeek

#1106
It was brought to my attention that when using a metric template the 3D materials cause SketchUp to crash. This is because when using metric units or a metric template the plugin assumes the units configured in the name of the 3D materials is mm and not inches.

If you are using metric you want to define your 3D materials with millimeters and not inches, otherwise you end up with a crash or a very tiny 3D texture which will take forever to draw.

For instance with battens the default material defined is:

battens_12.0_1.5_0.75

To setup a comparable board and batten material for metric one would create a material with the following name (notice how I've converted the numbers to mm from inches):

battens_300_38_19

When the plugin is in metric mode it will assume these numbers are in (mm) and not inches. Please be aware of this.

For example with shiplap try creating a material named:

shiplap_197_19

For a 3D lap siding try:

lap_178
Nathaniel P. Wilkerson, P.E.

Medeek

Version 3.5.0 - 02.23.2024
- Separated the tee blocking option for exterior and interior walls.
- Fixed a bug with geometry guides for metric templates.

Nathaniel P. Wilkerson, P.E.

Medeek

Version 3.5.1 - 02.24.2024
- Added a 45 and 135 degree rainscreen option for rectangular walls.



This update per customer request.
Nathaniel P. Wilkerson, P.E.

Medeek

Version 3.5.2 - 03.02.2024
- Added the following door types: 3/4 glass, double 3/4 glass.
- Added a separate threshold material option for all man doors.
- Added additional grille (grid) options for glass doors.





Nathaniel P. Wilkerson, P.E.