Development and Updates for the Medeek Truss Plugin

Started by Medeek, November 07, 2015, 03:06:39 AM

Previous topic - Next topic

0 Members and 9 Guests are viewing this topic.

Medeek

Version 3.1.1 - 02.13.2022
- Enabled advanced options for mono scissor trusses.
- Enabled the "Edit Truss Assembly" function for all mono scissor trusses (imperial and metric units).



Also note that one can adjust the bottom chord pitch to be the same as the top chord pitch and with a raised heel (ie. 24") you can effectively create shed roof parallel chord trusses:

Nathaniel P. Wilkerson, P.E.

Medeek

I like the idea of providing another option for truss blocking when the heel height exceeds 15+ inches.

Here are a couple examples of manufactured metal plated panels:





Notice how the diagonal web changes when the aspect ratio of the panel exceeds a certain value, this has to do with the difficulty in trying to cut too shallow of an angled cut.
Nathaniel P. Wilkerson, P.E.

Medeek

Version 3.1.2 - 02.15.2022
- Enabled MPC wood blocking panels for common trusses.



If your heel height exceeds 15" and you have selected "Vertical" heel blocking as your orientation, then rather than solid blocks the plugin will now insert MPC blocking panels instead.

I still need to enable heel blocking and blocking panels for various other truss types and also make this available for rafter roofs as well.
Nathaniel P. Wilkerson, P.E.

Medeek

Version 3.1.3 - 04.10.2022
- Enabled 3D roof and wall cladding materials for monopitch trusses.
- Fixed a bug with the valley set detection option.



Nathaniel P. Wilkerson, P.E.

Medeek

Version 3.1.4 - 04.27.2022
- Fixed a minor bug with the advanced options for scissor trusses.
- Updated the scissor truss module so that raised heel trusses are properly rendered/drawn.

Nathaniel P. Wilkerson, P.E.

Medeek

Version 3.1.5 - 05.07.2022
- Enabled 3D roof and wall cladding materials for attic trusses.

Nathaniel P. Wilkerson, P.E.

Medeek

Version 3.1.6 - 06.05.2022
- Enabled ceiling insulation for common trusses: Batt, Blown-in.
- Enabled ceiling insulation for monopitch trusses: Batt, Blown-in.
- Added an insulation layer in the global settings.







I still have a lot of work with regards to insulation and numerous other truss types and rafter roofs.
Nathaniel P. Wilkerson, P.E.

Medeek

Version 3.1.7 - 08.26.2022
- Enabled the following 3D roof cladding material for shed rafter roofs: Metal.

Nathaniel P. Wilkerson, P.E.

Medeek

Version 3.1.8 - 08.29.2022
- Added a parameter into the general tab of the global settings to allow for adjustment of the size of labels and annotations.
- Added a parameter into the general tab of the global settings to allow for adjustment of the font for text found within annotations and labels.
- Added a "resolution" parameter into the general tab of the global settings for adjusting the smoothness of annotation text.
- Added a "Label Rotation" parameter (0 or 180 degrees).
- Enabled various annotation options/parameters for truss roofs.





Basically just bringing some of the annotation formatting options over from the Wall Plugin.  I will still need to enable these options for rafter roofs, hip sets and complex roofs.  This update per user request.
Nathaniel P. Wilkerson, P.E.

Medeek

Version 3.1.9 - 11.25.2022
- Enabled subtractive geometry for all shed rafter roofs.

Nathaniel P. Wilkerson, P.E.

Medeek

Version 3.2.0 - 11.28.2022
- Fixed a minor bug with the roof cladding thickness parameter when the materials option is toggled off.



Strange that I never noticed this bug before but I guess most of us turn on the materials option so that is probably why no one ever really noticed.  I highly recommend turning on the materials options to get the full bang for your buck out of the plugin but in the rare chance you don't want to this bug fix will take care of the previous issue reported above.
Nathaniel P. Wilkerson, P.E.

Medeek

Version 3.2.1 - 01.04.2024
- Updated and adjusted the logging function and auto-update functions.
Nathaniel P. Wilkerson, P.E.

Medeek

Version 3.2.2 - 01.11.2023
- Enabled layer control integration with the Medeek Project extension.
- Moved the Medeek Tools module to the Medeek Project extension.
Nathaniel P. Wilkerson, P.E.

Medeek

Version 3.2.3 - 02.06.2023
- Fixed an infinite loop bug for (full) roof returns on truss roofs.
- Updated the subtract feature to include roof return rafters and gutter downspouts for truss roofs.

Nathaniel P. Wilkerson, P.E.

Medeek

Version 3.2.4 - 02.09.2023
- Enabled subtractive geometry for all complex rafter roofs.
- Updated the subtract feature to include gutter downspouts for all rafter roofs.



Nathaniel P. Wilkerson, P.E.