Version 1.1.7 - 02.17.2024
- Enabled custom rebar within the Medeek Estimator for Slab-on-Grade foundations



Per customer request.

Version 3.4.9 - 02.16.2024
- Added an RGB color code input into the Add, Update and Import menus for custom materials.
- Added an RGB color code input for each color in the Materials tab of the Global Settings.
- Added a "Toggle RGB Input" button to the Materials tab of the Global Settings.





Updates per customer request.

Version 1.1.6 - 02.13.2024
- Added foundations within the Medeek Estimator: Slab-on-Grade, Slab, Stemwall, Grade Beam



There is still a lot more work to be done with adding all of the various hardware and items into the estimating for foundations.  This is just a start.

Yes, please take a look at this tutorial video to better understand how 3D materials work:

The progress has been slowed by some ongoing health issues I've personally encountered however progress is being made and I am carefully coalescing on a new plugin which will replace the existing module in the Truss plugin.  Also as updates have been made with various licensing updates within the other plugins I have been migrating those updates into this new plugin.  I apologize in the significant delay with this new plugin but please remember that I am still a one man show and I am spread very thin across the development of six different plugins now.  Each plugin requires a certain amount of attention as bug fixes, updates and feature requests all consume time and energy.

Version 1.9.5 - 02.13.2024
- Improved the serial number verification logic within the License tab of the Global Settings.
- Updated the javascript logic within the License tab of the Global Settings.
- Added statistics for the following foundation types (Medeek Estimator integration): Slab-on-Grade, Slab, Stemwall, Grade Beam

Version 3.4.8 - 02.04.2024
- Added a Sheathing Reset button in the Sheathing tab of the Global Settings.
- Added Dimension Layer 5 specfically for framing/elevation auto-dimensions (Layer tab of the global settings).
- Enabled editing of dimensions for framing/elevation dimensions (rectangular walls only).






Tutorial 46 - Editing Framing Dimensions (7:34 min.)

Version 3.4.7 - 02.01.2024
- Updated the Columns tab of the Global Settings with new parameters.
- Added glazing color and opacity parameters to the Sheathing tab of the Global Settings.





The Columns tab now includes Custom and Blank under Column Type.

Up until now the glass color and opacity has been hard coded in to the plugin, now the user can adjust these values if desired.

Version 1.4.1 - 01.31.2024
- Improved the serial number verification logic within the License tab of the Global Settings.
- Updated the javascript logic within the License tab of the Global Settings.
- Added standard PVC (Schedule 80) electrical conduit sizes into the custom wire library.
- Fixed a minor bug with the edit wire profile logic of the wire module.



It turns out the outer diameter and bend radius of schedule 80 conduit is the same as schedule 40, only the wall thickness is different.  I learn something new everyday.

Yes, please watch this tutorial video:

I would need more details when you talk about "additional structural framing parts".

I cannot stress enough that everyone should start by watching as many tutorial videos as possible:

http://design.medeek.com/resources/medeekwallplugin.pl#Videos

The plugin is now very deep and very broad with all sort of capabilities and "too many" parameters/options.  Unless you watch the tutorials you will not fully understand the power of this plugin and what it can do. 

Some complain that there are too many parameters but without all of these options the plugin would not be flexible enough and sooner or later you would find yourself running into something that you wish you had an option for. 

The fourth icon from the left is the open/close tool:



The Opening Tool and Copy Opening Tool are on the Medeek Wall Tools II toolbar, they are something different.

Version 3.4.6 - 01.30.2024
- Added a "Dimension to Centerline" option for framing dimensions in the General tab of the Global Settings.
- Enabled centerline dimensioning for openings, columns and SSW for rectangular walls.
- Added a "Style 5" (Pull Plate) to the built-in door hardware options.
- Added more options for grid style window grilles: 3X4, 4X5, 5X6.







All updates per customer requests.

Version 3.4.5b - 01.28.2024
- Fixed a bug with holdowns for in-wall columns.
- Fixed a bug with the bottom plate cutting algorithm for in-wall columns.