I will also be developing this extension as part of the mdkMEP suite.

The Medeek Plumbing logo shall be:





The mdkMEP bundle will consist of the following three plugins/extensions:

Electrical, HVAC and Plumbing

The Medeek HVAC icons shall be:






Maybe a little boring but sometimes I think simple is better.

Before I ever ventured into the plugin development world I did quite a bit of residential structural work. Since then I've pretty much switched hats and now my entire focus is on the extension development.

As a resource to other designers, architects and engineers I may occasionally post a few examples of structural work I've done over the years. Most of this work was done about 10 years ago. Note that I've removed any private or identifying information. Additionally these examples are for Educational Purposes ONLY and are not intended as a specific engineering solution for any other project or plan. Let me know if any of this is helpful or useful and I might be inclined to post a few more examples.

Here is a simple braced wall plan detail:

Please post any ideas, suggestions or other thoughts you may have on the Floor plugin and what direction you think I should go on specific features.  I will also try to post my own ideas and future plans and concepts I am working on or considering.

A few screenshots showing how I am stacking posts and beams to ensure a valid load path to the foundation:

https://youtube.com/shorts/oBe6XK6E4RQ?feature=share

https://youtube.com/shorts/yrbbNjPwJlQ?feature=share

https://youtube.com/shorts/YANMYxHjtag?feature=share

https://youtube.com/shorts/JfB9NUpfxJI?feature=share

I've started a new podcast where I will be discussing things other than my plugins.  I just posted my first episode:



Arguably this first episode probably is not of much interest to many of you, unless you are of the LDS faith or know me on a more personal level.  Most of my extended family and many friends are active members in the "Church" so whether I like it or not the Mormon Church is still very much a part of my life and a part of my family history (going back five generations).  Of course my wife and I and our children are not active members in the Church anymore, it is too hard to live a lie, so to speak.  However we do respect the religious choices that our family and friends make in remaining with the Church and whatever level of activity they choose to participate at.

Version 2.0.7 - 11.01.2022
- Added four additional top chord point loads under advanced loads for solar panel installations and other applications.

So this is a little off the beaten path for me, usually I am posting about one of my plugins, but here goes anyways.  Since Covid started a couple years back I've had to give up on going to the gym and instead have managed to cobble together a fairly decent personal gym in my garage.  I've got a treadmill, a couple benches and some dumbells and other free weights.  It actually isn't too bad of a setup.

The only thing I have really been missing is a decent lat pulldown machine.  I was about to purchase one on Amazon but after reading a lot of reviews it seems that a good quality machine will come at a not so good price.  That being said I thought it might be interesting and fun to try and build one instead with my teenage boys (get them off their games for once).  Here is my first crack at a design:



My biggest issue or concern is rigidity and stability.  Don't need this thing toppling over on me or one of the kids.  I also haven't shown the hardware in the model yet but it will be pretty simple, a couple of pulleys, wire rope and the 10 lbs pulldown bar.

The link to the model is below if you care to take it for a spin:

https://3dwarehouse.sketchup.com/model/6ecb6e6a-715a-4946-9820-21105f31be5f/Lat-Pulldown-Machine

Comments?

P.S.  When it comes to strength and rigidity my concern is largely due to the amount of weight I typically pull (120 - 175 lbs) on a machine like this.  I will probably construct it with glue and screws, but it may need more bracing with OSB or plywood.

I had a few conversations with a number of people recently about the upcoming behemoth that is Blender.  Some people are telling me that I should port my extensions to Blender and other drawing platforms rather than solely focusing on SketchUp. 

I've never spent any significant time looking into Blender but it does have a serious amount of momentum right now and it does have a Python API.

What are your thoughts with regards to doing architectural work in Blender?  How does it compare with SketchUp?  Would it actually be of interest to anyone?

For the last five years I have solely focused on developing my extensions to work within SketchUp however from a business standpoint it never hurts to diversify and take all my eggs out of one basket.

Some recent questions on shed walls from users of the Wall plugin.

Here is a very basic example of a shed wall application:

https://3dwarehouse.sketchup.com/model/33c80821-ce90-468c-abc9-499bb72eef16/Small-Shed-1

Notice that the rectangular walls are set to "inset outside" corners and the shed walls are set to "outside" corners.  It could be vice versa but I think this configuration is more common.

If you look closely at the model you will notice that the upper rectangular wall doesn't quite match up with the upper shed wall height.  This is because I rounded the wall height to the nearest 16th of an inch, however there is no reason why I can't take it to the 5th or 6th decimal place if I wanted it to be more exact, it's really up to the user.

A few years ago when I was heavy into the artwork:



http://wilkersonart.com/

I'm not sure if this information is out there or widely known so I am posting this notice just in case.

If you are a teacher, professor, academic instructor or a student (high school or university), you are entitled to a free license for each of the Medeek extensions (full versions) at no charge.

In order to take advantage of this offer all you need to do is create an account (client profile) on the Medeek website (design.medeek.com) and then notify me via email that you would like a student/instructor license.

I typically will request some form of student/instructor verification and then I will issue the serial number for each plugin (Wall, Truss, Floor, Electrical).

The academic licenses are no different in functionality or features than the full licenses of the plugins. When I issue a license to an instructor, the license can be used on up to 50 machines/workstations. The student serial can be used on up to 3 machines, the same as the regular license.

In an effort to make my extensions more accessible to the student I have also maintained compatibility with SketchUp Make 2017, which is still available for download here:

https://help.sketchup.com/en/downloading-older-versions

I also fully support the plugins (via phone and email) for academic customers, however this support is expressly for issues having to do with the plugins and not for general SketchUp questions, training or establishing methods of workflow between SketchUp and Layout.

I am starting this new discussion thread as a fork from the Medeek Truss Plugin thread since the Medeek Floor extension will now become a stand alone extension/plugin.

Its icon(s) will be:


This new plugin will ultimately replace the floor joist/truss module currently found in the truss plugin. 

Similar to the complex roof module the designer will be able to create any polygon shaped floor outline, and edit the shape by moving/adjusting the edges.

There will be a tool for creating and editing holes within the floor.

There will also be a tool for creating polygon shaped floor coverings (ie. carpet, tile, wood, pergo etc...) with an associated label and optional sqft callout.  These floor coverings will be situated on top of the sub-floor and can be individually edited.

Eventually the floor assemblies will also be integrated with the estimating module currently found in the wall plugin (this will be moved to the Medeek Project extension in the near future).

There will also be an option for gypsum on the underside of the floor with a user editable offset (ie. 5.5 inches).

I have a few more ideas for this new extension but I would be interested in hearing what ideas you might have that would make this extension have even more utility for you and your workflow.

Has anyone else ever wondered where the 1/2 comes from in the equation for the kinetic energy of an object (E=1/2mv^2)? It finally donned on me why, I probably could have realized why years ago but I never really thought about it until now.

First look at the icons for the Medeek Project extension:





This plugin is the administrative plugin that will bring a number of tasks together in the mdkBIM suite.

Planned modules and tools:

- Medeek Project:  Project Info, Design Criteria, Levels
- Medeek Documents:  Scenes, DXF, PDF (removed from Wall plugin)
- Medeek Estimator (removed from Wall plugin)

The thread listed below gives a nice breadcrumb trail of some of my earlier work on snow load maps:

https://www.eng-tips.com/viewthread.cfm?qid=357228

Due to recent changes in the web service (API) of the USGS I have updated the Seismic Map(s) and the Medeek API (seismic data only).

The USGS has discontinued their design maps service and replaced it with a more streamlined JSON API. They have also discontinued previous outdated data sets and also brought new editions online.

I've updated the code that connects to the API and also upgraded from the IRC 2012 to the IBC 2015 for the seismic map:

http://design.medeek.com/resources/seismic/sdc.html

With the termination of their design maps service the automatic generation of the spectrum response graphs also went away. However, the raw data is still provided by the USGS API, and with that data I am able to graph the spectrum responses with good resolution.

The detailed report now includes larger more legible graphs for both the MCEr Spectrum and the Design Response Spectrum.

The input parameters for the Medeek API (seismic) has also changed. Please refer to the API web page below to review the recent updates:

http://design.medeek.com/resources/medeekapi.html

The output for seismic data has also had a minor change in formatting.

The first thing you will notice with the updated seismic data is the elimination of any IRC data, it is now all based on the IBC, ASCE or NEHRP.

As always more work needs to be done with the API and maps. I am still in the process of providing new maps for the ASCE7-16 wind speeds and updated state snow load maps. Recently SketchUp plugin development has monopolized most of my time and energy but I am committed to providing updates and upgrades to these other engineering services.

Thank-you for your continued support and feedback.