Recent Posts

Pages: [1] 2 3 ... 10
1
Medeek Wall Plugin / Re: Development and Updates for the Medeek Wall Plugin
« Last post by Medeek on November 19, 2018, 01:38:38 pm »
On a related note I just noticed John Brock's new book has been released:

https://www.amazon.com/gp/product/1119484006/ref=dbs_a_def_rwt_hsch_vapi_taft_p1_i0

I think this will be a seminal work on incorporating SketchUp into the residential design process.  I've already gone ahead an pre-ordered my copy. 
2
Medeek Truss Plugin / Re: Development and Updates for the Medeek Truss Plugin
« Last post by Medeek on November 19, 2018, 06:03:40 am »
I think I have the asymmetric truss roof figured out but shop drawings from a manufacturer would be helpful in confirming my own conclusions.
3
Medeek Truss Plugin / Re: Development and Updates for the Medeek Truss Plugin
« Last post by saakejam on November 17, 2018, 09:47:59 pm »
I used heel heights to fit facia lines and this was easy...  Just keep adjusting.  Hitting Update instantly moves geometry.
4
Medeek Wall Plugin / Re: Development and Updates for the Medeek Wall Plugin
« Last post by Medeek on November 16, 2018, 04:48:48 pm »
Version 0.9.9l - 11.16.2018
- Added an option to include 2D wall geometry in 3D modes (Framing, No Framing, CMU).
- Added an additional layer for 2D geometry.
- Added customizable colors for labels, 2D wall geometry, and 2D features (windows, doors, columns etc...)







The custom colors for the labels, and 2D geometry is per a discussion with a client today.  Hopefully this upgrade will help facilitate bringing the 2D geometry into layout for creating floor plans.
5
Medeek Truss Plugin / Re: Development and Updates for the Medeek Truss Plugin
« Last post by Medeek on November 16, 2018, 12:54:59 am »
Does anyone have any shop drawings of an asymmetric hip truss set they can send me.  Specifically I am looking for a hip truss set that has different pitches for front and back and then possibly a different pitch on the ends.  I have my theories on how such a truss set should be put together but it is worth the effort to study this a bit further and verify.
6
Medeek Truss Plugin / Re: Development and Updates for the Medeek Truss Plugin
« Last post by Medeek on November 16, 2018, 12:09:16 am »
I've recently been thinking about the multi-pitch hip roof again.  Eventually I needed to return to this topic since the designer needs the flexibility of assigning different pitches to the various roof planes.

The same issues with multi-pitch hip truss sets applies to rafter roofs as well.

When you have a hip roof situation and the pitches are different on adjacent roof planes yet you want to maintain the same overhang and line up the fascia then the wall top plate must change.  However with trusses rather than change the top plate you simply have to raise the heel of the truss on the low side until it equals the height of the adjacent side.
7
Medeek Wall Plugin / Re: Development and Updates for the Medeek Wall Plugin
« Last post by Medeek on November 15, 2018, 12:13:35 pm »
I been thinking about putting on a weekly one hour webinar where I can demonstrate the latest features of the plugin and then take additional questions from the audience.  Would there be any interest in this?
8
Medeek Wall Plugin / Re: Development and Updates for the Medeek Wall Plugin
« Last post by Medeek on November 15, 2018, 06:47:06 am »
Per customer request the available sizes of Wide Flange Steel Beams will be increased to the following:

W8x10
W8x13
W8x15
W8x18
W8x21

W10x12
W10x15
W10x17
W10x19

W12x14
W12x16
W12x19
W12x22

W14x22
W14x26
W14x30
W14x34

W16x26
W16x31
W16x36
W16x40

W18x35
W18x40
W18x46
W18x50

W21x44
W21x50
W21x57
W21x62

W24x55
W24x62
W24x68
W24x76
9
Medeek Wall Plugin / Re: Development and Updates for the Medeek Wall Plugin
« Last post by Medeek on November 15, 2018, 05:31:02 am »
Some of you may have noticed the difference in the way materials are handled between the garage doors and man doors.  The method being used in the garage door module is the new and improved method.  I will be updating both the man door module and the window module to this new system which incorporates the materials in the Custom Material Library.

Also at some point I need to switch the draw door, draw window and draw garage door menus to HTML.  As always, never a dull moment and way too much to do.
10
Medeek Wall Plugin / Re: Development and Updates for the Medeek Wall Plugin
« Last post by Medeek on November 14, 2018, 07:21:03 pm »
Version 0.9.9k - 11.15.2018
- Added the ability to import materials directly from the model within the Custom Material Libary/Manager in the global settings.
- Provided an additional parameter in the Wall Corners tab of the global settings for setting the thickness of corner blocking (3 and 4 Stud Block corner treatment only).



With this latest update the tutorial on the Material Manager is somewhat out-of-date/obsolete.  However the basic functionality has not changed, I've really only added one additional action.



The ability to customize the blocking on these corner treatments was per a request from one of our Australian clients.  I've added a tooltip in the global settings to more fully explain the usage of this parameter.

Now back to the big items on the list.
Pages: [1] 2 3 ... 10